Axial AE-3 Vanguard Brushless ESC For SCX10 II SCX10 EXO RR10 #AX24260 (Out of stock)

Description:

Axial’s new AE-3 Vanguard brushless ESC delivers smooth power at all times. Numerous programmable features let you fine tune your set-up to perfectly match any conditions. Superior power and efficiency over standard brushed motors to help you leave the competition in the dust! Manufactured by Castle Creations.

Feature:

• For: Axial SCX10 II , SCX10 , EXO , RR10
• Material: Steel
• Color: Black
• Brake/Reverse Type – sets ESC’s reverse mode, and how it is applied. Reverse can also be disabled.
• Brake Amount – sets the percentage of braking power at full brake. Low-grip surfaces will require less braking power to stay in control, especially when entering corners.
• Reverse Amount – sets the percentage of power applied when reversing, if reverse mode is enabled. Lower percentage for less speed, higher percentage for more speed.
• Punch/Traction Control – sets the percentage of power applied at start-up. Use less power for low-grip surfaces, use more power for high-grip surfaces.
• Drag Brake – sets the percentage of brake that is automatically applied at neutral throttle. Brushless motors have a lot less drag than brushed motors. This mode allows fine tuning to match the slight braking effect of a brushed motor at neutral. Higher percentage of drag brake will give you more braking power at neutral throttle.
• Dead Band – sets throttle sensitivity from the neutral position. Less dead band gives a more instant throttle response. More dead band yields a less instant throttle response.
• Cut-Off Voltage – sets the voltage threshold at which the ESC removes power from the motor. For use with Lipo batteries to retain a safe minimum voltage. This feature can be turned off for use with standard NiMH packs. High capacity NiMH packs (5000mah or higher) are recommended for best results.
• Motor Timing – sets the timing advance on the motor to reduce or increase amp draw, run time, motor/battery temperatures, top speed and punch. Great for fine tuning performance.

Specification:

• Voltage Input: 2S-3S LiPo (7.4V-11.1V); 6-10 NiCd/NiMH (7.2V-12V)
• BEC: 3A @ 2S input
• Current Rating: up to 100A
• Dimensions: 49.5mm x 38mm x 21mm
• Weight: 62g
• Motor Wires: 4mm female bullet connectors
• Battery Wires: 13AWG 4.72 in (120mm), with Deans® Ultra Plug®
• Receiver Wire: 10 3/4 in (273mm), with universal radio connector
• Motor Limit: on 2S/4200kV Max; on 3S/2900kV Max
• Protections: low voltage cutoff, thermal protection

Include:

• Axial AE-3 Vanguard Brushless ESC (1 set)
• Manual (1 pc)